Platform
One conversation from question to report
In TrustIoT.AI, comparing readings, following a trend, adding equipment and preparing a report can all begin with a single sentence, while gateways, devices and models are laid out clearly in the management console.
Ask
A conclusion and a next step
Ask why July used more power and it lines up the production lines, air conditioning and compressors, points to where most of the energy went, and suggests which work could move to off-peak hours. Every number is calculated straight from the data.
Why did we use more power in July?
July used 12% more than June. Most of the increase came from air conditioning and Line 2.
JuneJulyMWh
Next step: move Line 2's cleaning cycle to off-peak hours.
Charts
Charts drawn for the question
A chart is made when a question needs one: only the chart that answers it, with what it shows written beside it, so nobody has to read the trend alone. Line charts follow trends; bar charts compare.
Target 22 ± 0.5 °C
Readings rise by about 0.4 °C around 14:00 each day but stay within the target band.
Knowledge
Your knowledge is the authority
Each device model can carry knowledge your team maintains: what codes mean, how readings scale, what the machine drives. The assistant answers from it, in the same terms your team uses on the floor.
Drive · model VF-200
- 22
- Overcurrent during acceleration
- 23
- Overvoltage during deceleration
What does fault code 22 mean on this drive?
On the VF-200, code 22 is overcurrent during acceleration. A good first check is the acceleration time and the load on the motor.
Adding equipment
Add equipment in conversation
Paste the register table from the vendor's manual and say which device to add. It turns addresses, function codes, byte order and data types into the system's format, validates its own draft and confirms with you before creating anything. Where it is unsure, such as a unit address already taken on the same gateway, it asks.
Add the meter in panel B. (register table pasted)
| Point | Address | Type |
|---|---|---|
| Voltage | 30001 | float32 |
| Current | 30007 | float32 |
| Active power | 30013 | float32 |
| Energy | 30343 | float32 |
- Addresses do not overlap
- Types match register lengths
Unit ID 1 is already used on this gateway. Use 2 instead?
Energy
Energy performance reports
When audit season comes, there is no need to export tables from several places and rebuild them. The audit period's data becomes one report, each line traceable to raw readings the gateway collected on site.
- Total consumption
- Comparison with the energy baseline (EnB), and savings
- Month-on-month and year-on-year change
- Scope 2 emissions, using Taiwan's grid emission factor
- Significant energy use (SEU) records, with the source gateway
- Consumption spikes and equipment outages
Energy performance report · Q2 2026
- Total consumption
- 412,300 kWh
- Against baseline (EnB)
- −3.8%
- Month on month / year on year
- +1.2% / −2.6%
- Scope 2 emissions
- 195 t CO₂e
Each line traces to raw gateway readings
Console
Everything in view
The conversation does the work; the console keeps it in view.
Gateways
Bind, rebind and retire gateways, each step on record.
Devices
Every device, the gateway it hangs off, and notes on what it drives.
Models and knowledge
Data point definitions and the knowledge your team keeps for each model.
Members and roles
Named accounts with separate roles, and no shared logins.
Put your first gateway on the line
Tell us about your equipment and what you would like to solve first. We will shape a rollout plan around your site and work through it with you from the first step.
Get a rollout plan